Welcome to Simple Pump Support

We're here for you.

Measure Your Well Water Level with the Eno Well Watch

October 1, 2024

•

5 min read

The Eno Scientific Well watch doesn't require any tape or string that may get stuck while trying to measure your water level in your well. There are also no contamination issues.

The Eno Well Watch provides your water level, the quantity of water in the well, the drawdown, and the recovery rate of your well.

‍

ALWAYS KNOW YOUR WATER LEVEL

You do NOT want to be surprised by suddenly running out of water.

Imagine trying to have your submersible lowered or your well deepened when everyone within fifty miles needs exactly the same at the same time.

Water levels are dropping around the country — from a few feet to tens of feet to a hundred feet and more. Do you live in an area affected by increasing drought or fracking, or are you concerned about overuse in your community?

The Well Watch can give you peace of mind by providing you with the ability to monitor current, real-time levels, or trends in usage and level patterns. These units are the perfect accessory for the home or small commercial water well.

‍

EASY INSTALLATION

The Well Watch unit comes with the display unit, the probe, and the electrical adapter… ready to go.

Most Simple Pump well caps now have a port where the Well Watch can be installed. Just screw the Well Watch into the well cap.

The usual methods of monitoring water levels in your well were intrusive water tapes, bubblers, or transducers. These methods open your well to contamination issues and tend to get stuck in the pump wiring resulting in an expensive, time-consuming fix.

The Well Watch uses sound waves to non-invasively measure water levels. This makes monitoring your well quick, safe, and inexpensive.

The alarm feature can be used to alert you to a low water level, preventing overuse or damage to the pump and alerting you to the possible need to lower your pump.

‍