Welcome to Simple Pump Support

Simple Pumps are CNC-machined for superior reliability, require less effort, fit alongside submersibles, cost significantly less, and can easily upgrade to a motor for solar use.

Pumping water with the Simple Pump is easy—even from depths up to 325 feet. Lever design requires as little as 12 lbs of force, outperforming other hand pumps.

Install Simple Pump on existing Mark II/III/VLOM or AFRIDEV pedestals easily with our adaptor, minimizing cost and disruption. Adjustable height for seamless integration.

Yes, you can easily add a Simple Pump motor to your existing hand pump. The modular pump heads allow quick switching in just minutes.

Using the Simple Pump with wind power is not supported and will void the warranty.

Run the Simple Pump motor on AC by charging batteries first, ensuring efficient power use and backup during outages. Easily switch to hand-operation for convenience.

Ensure optimal use of Simple Pump with low yield wells by placing it deeper below the water surface. Avoid warranty issues by stopping if water flow ceases.

Yes, the Simple Pump deep well hand pump can be installed in a 2-inch casing. Follow special installation guidelines for optimal performance and secure mounting.

Discover if the Simple Pump fits your 7" casing. Standard 7" ID casings have a 7.625" OD. If it's 7" OD, the ID is 6.25". We offer well caps for both sizes.

Install the Simple Pump on your underground tank with ease. Our pump anchors to a vertical well casing, ensuring efficient water access from tank to surface.

Yes, the Simple Pump deep well hand pump can pump water into your home's pressure tank, even from a deep well, using its strength and precision engineering.

Simple Pump motors are solar-compatible, using minimal power. With just 1-2 panels and batteries, enjoy reliable, all-day operation even in low sunlight.

The Simple Pump can work in wells with limited water, but a small buffer and low recovery rate require careful planning. Verify water levels and recovery rates before installation.

Yes, the Simple Pump works with your existing pipes and pitless adapter. It installs alongside your submersible pump using a special adapter for seamless integration.

The Simple Pump efficiently fills residential pressure tanks up to 45 psi, thanks to its precise manufacturing, ensuring reliable performance in most wells.

Ensure efficient irrigation with a check valve. Essential for systems with pressure tanks or when pumping to elevated tanks. Prevents backflow and maintains water pressure.

We don't have a catalog, but our Products Parts List includes all items and prices. Request a customized quote based on your specific well and needs for accurate pricing.

A Simple Pump can fit in a 4" well with a pitless adapter, though maneuvering or replacing the adapter with a slimmer version may be necessary for installation.

Find your well's water level and depth on your well report. If unavailable, request a copy from your state or county, or measure yourself with caution to avoid tangling the submersible wiring.

The Simple Pump Deep Well Hand Pump is set 35-40 feet below the water level for safety. Add more units for extra security. Get a free custom quote today.

The Simple Pump can hand pump from 325 feet and motor pump from 225 feet, with adjusted limits when pumping into pressurized systems or uphill.

The Simple Pump excels in deep well hand pumping, reaching depths of 325 feet, surpassing competitors. Its lever arm design ensures ease of use, requiring minimal force even at maximum depth. Ideal for manual or motorized pumping, it adapts to various configurations, making it a versatile choice for deep well water access.

The Simple Pump Solar stands out with top-quality materials, reliable design, and easy installation. High-efficiency solar panels ensure performance even in low light.

Simple Pumps are precision-made with computer-controlled machining for improved efficiency, reliability, and easy part replacement—even years later.

Discover the Simple Pump's efficiency: delivers 4.5, 8.5, or 20.5 ounces per stroke. Choose the right cylinder for optimal water output.

Adjust the Simple Pump to Periscope Position with care. Follow detailed instructions, use a helper, and manage the system's weight. Full steps available on our site.

Learn how to remove the Simple Pump hand pump handle with two methods: with or without removing the clevis. Follow detailed steps for safe and efficient handle removal.

The Simple Pump works in freezing temperatures with freeze-proofing options: a weep hole to lower water level or a pitless adaptor for underground piping.

The Simple Pump can be mounted on hand-dug wells using a well adapter plate that bolts to concrete, metal, or wood covers. Explore our well adapter mounting plate.

Explore EMP-resistant motors: simple units with no control circuitry and advanced assemblies with high-quality protection. Safe and reliable solutions.

Hand pump water is safe if compliant with the Safe Drinking Water Act. Simple Pump uses lead-free stainless steel and certified materials for safe drinking water.

The Simple Pump is lead-free, Safe Drinking Water Act compliant, and meets California Proposition 65 standards for safe drinking water.

Installing a Simple Pump in a 4" well with a pitless is possible, though rare. Maneuvering or a slimmer pitless adapter may be needed for success.

Yes, the Boshart well cap works with bump-out setups. Wiring exits through the bump-out, and the Simple Pump installs on top. Explore custom well caps on our site.

Compare hand pumps: The Simple Pump requires moderate effort (12-18 lbs) up to 325 feet, while Bison exits the moderate range around 150 feet of water level.

Recommended for single-family use, the solar-powered Simple Pump system offers reliable water delivery into an ambient tank, ideal for homes, gardens, and light industrial needs.

Should you tie into the pitless adapter or pump out of the well cap? It depends on your location, needs, and budget. Exiting through the well cap is easier, while a pitless adapter requires more work but offers more flexibility.

Optimize your well with Simple Pump Cylinders, designed for deep well hand pumps and ideal for static water levels. Reliable, efficient, and durable solutions.

Simple Pump offers reliable hand and motor-operated water pumps for industrial and environmental applications. Ideal for contaminated water, desalinization, and well monitoring.

Simple Pump hand pumps offer a max lift of 325' with flow rates up to 8.5 oz/stroke. Motorized options lift up to 225' with flow rates up to 1.6 gpm.

Optimize your pumping system with our efficient Linear Bearing Link Drive Pump Motor, available in 12VDC and 24VDC options, offering low average draw and peak performance.

The Simple Pump motor system is ideal for single-family use or industrial applications. Recommended setup includes a solar-powered pump into a 200-500 gallon ambient tank.

The Simple Pump, established in 1999, is a freeze-proof, Safe Drinking Water Act-compliant hand well pump with durable materials, precision engineering, and versatile power configurations.

Simple Pump hand well pump, 325 feet: Lead-free stainless steel, minimal wear points. Well caps from 2″ to 8″. Motor pumps up to 225′ depth with 12v/24v power.

Simple Pump's solar system offers unmatched reliability, durability, and versatility with high-quality components, ensuring efficient water pumping even in low light.

Check the Simple Pump Well Compatibility Chart to determine if the Deep Well Hand Pump fits alongside your submersible. Requires just 1.6-1.8″ clearance.

Explore Simple Pump home installation configurations: hand pumping to pressurize your water system, solar-powered setups, or motor-powered systems for reliable backup solutions.

The static water level is the distance from the ground to the water in your well at rest. The water table refers to the saturation level in soil and rock beneath the surface.

Discover well depth: the total distance from ground level to the bottom of your well shaft. Essential for water access and maintenance.

Simple Pumps are made from SDWA-compliant stainless steel, aerospace-quality fiberglass, PVC, and aircraft-grade aluminum, ensuring safe and durable water pumping.

Simple Pump is precision-manufactured in the USA using CNC machining, ensuring consistent quality. Made from lead-free stainless steel, aluminum, fiberglass, and food-grade PVC.

Yes, pumping air can damage the Simple Pump motor seals and piston. Stop pumping if water stops flowing and allow the well to refill to avoid damage.

Wondering if a Simple Pump hand pump will fit your well? Learn how our pump works alongside electric pumps in 4” or larger casings and what options exist for smaller wells. Discover your well’s compatibility today!